Here's a great little pack containing all of the consumables you need to pull down a vacuum to produce professional results- whether that be on a mould, or to clamp items together while adhesive cures, on a repair on a panel/hull/fuselage/or whatever.
Please note that this kit does NOT contain a VACUUM PUMP and that a vacuum cleaner will NOT do the job! - You will also need some vacuum hose and although in the notes in this pack there is a tip on connecting your vacuum hose to the job without one, if you want to connect your pump to your job in a repeatable and easily removeable way, you'll need a self cutting breach unit too.
The Vacuum Consumable Project Pack Contains:
15m of Butile Vacuum Tape (1 Roll)
3 Sqm (2 Linear Metres x1500 wide) of (Toughened Nylon) Vacuum Bag Film
1.5 Sqm (1.5 Linear Metres x 1000) of Non Woven Breather Fabric
1.5 Sqm (1.5 Linear Metres x 1000) of Non Porous Release Film
1.5 Sqm (1.5 Linear Metres x 1000) of Porous Release Film
1.5 Sqm (1,5 Linear Metres x 1000) of Peel Ply
Instruction Sheet on how to produce effective vacuum bags.
